CDMA Workshop [3.3.0] (06-Nov-2008)

 [+] Added new field to read/write - "EVDO Revision" ("Evdo" tab)

 [+] Added displaying of PRL version in phone ("Phone Information" section)

 [+] Added automatic detection and displaying - USB/Serial connection

 [+] Added up to 256 COM port numbers in COM ports drop-down list

 [+] Added automatic ports searcher, which show detailed info about present ports in system ("Port" button - "Main" tab). No need to search COM port numbers manually now

 [+] Added RX / TX lamps (outgoing and incoming  traffic)

 [+] Added progress bar for PRL reading/writing

 [+] Added new memory presets to read SPC ("Universal RAM" method) for HTC Diamond

 [+] Added new option (Main menu - Options) - "LG EFS unlock". Find details in Help file

 [+] Added SPC / ESN support for Samsung U470 and Sky U150 (16-digit passwords)

 [!] More stability and reliability in DM engine. If DM engine detects bad CRC in packet, it will repeat the same command again some times, if the packet still has bad CRC, then the "Bad pckts" counter will be increased

 [!] Improved "USMD" button ("Main" tab), to support more UTStarcomm models and firmware revisions (switching into DM mode)

 [!] Fixed bug in "Motorola" method - "SPC" section (appeared in v3.2.6), when it reports  - "Nothing found", but really the security codes were found

 [!] Fixed bug in Flash read/write functions - "Phone does not answer in DL mode". The bug was appeared at USB connection mode only, in rare situations

 [!] Fixed bug when CDMA Workshop crashes when reading any other model at once after reading any Samsung korean market model

 [!] Minor bugs fixed and impovements

CDMA Workshop [3.2.6] (22-Aug-2008)  -  Bug fixes release

 [!] Fixed bug when connecting with BlackBerry models and some data cards/modems ("no answer" error)

 [!] Fixed bug when loading bootloader for some ZTE / Axesstel models  ("invalid magic number" error). Read/Write functions in "Flash" section and  "ZTE / Axesstel" method in "ESN" section

 [!] Minor bugs fixed and impovements

CDMA Workshop [3.2.5] (16-Aug-2008)

 [+] Added 460800 baud rate support (with auto-switchement)

 [+] Added "Send "000000"" option ("SPC - Send" button in "SPC" section), in order to send SPC = 000000 in one click

 [+] Added SPC / ESN support for Samsung U410, U940, Pantech PX-500 modem (16-digit passwords)

 [+] Added new tab "EVDO", where you can read / write EVDO settings (PPP/PAP/EVDO user names, passwords, etc)

 [+] Added new universal method of reading A-Key, SSd_a, Ssd_b for most LG models ("LG" method - "Cave" section)

 [+] Added new universal method of reading A-Key, SSd_a, Ssd_b directly from RAM ("Universal RAM" method - "Cave" section)

 [+] Added support to write A-Key for Novatel U720/V720 modems ("Custom methods" - "Cave" section)

 [+] Added support to read SPC, User Lock, A-Key, SSd_a, Ssd_b for all SonyEricsson models ("SonyEricsson" methods in "SPC", "User Lock", "Cave" sections)

 [+] Added hotkey CTRL-J to save clipboard graphics to a .JPG file (ex. you can save screen-shots of CDMA Workshop with all read phone information)

 [+] Added new memory presets to read SPC ("Universal RAM" method) for BlackBerry 8130, 8330, Novatel U720 modem

 [+] Added new field to read / write - "Preferred mode" ("NAM" tab)

 [+] Added option to check new versions of CDMA Workshop online

 [!] All built-in memory presets to read SPC ("Universal RAM" method - "SPC" section) are moved to a "presets.txt" file. You can easy edit built-in memory presets now.

 [!] Fixed bug (Range Check error) while trying to connect with some models

 [!] Fixed bug in "Kyocera Minlock (SPC3)" method. Kyocera FTM mode does not support higher baud rates

 [!] Improvements and bug fixes in internet connection module

 [!] User interface improvements, more diagnostic messages displayed, different improvements

CDMA Workshop [3.2.0] (28-May-2008)

 [+] Added internet verification of license keys. As a result of this option - added ability to enable/disable current license key and to move software to any PC user want

 [+] Added support to work with up to 100 COM ports (modern devices may use COM ports with big numbers)

 [+] Added 230400 baud rate support (for USB-to-COM converters, USB cables based on Prolific (ex. Kyocera), FTDI, etc chips or for hardware COM ports with non-standard drivers)

 [+] Added baud rate automatic switching to 230400 in DM mode (if possible)

 [+] Added full MEID support: read/write, enable/disable, automatic check for pESN/MEID matching + re-calculation of pESN (in order to match MEID)

 [+] Added three new methods to write MEID: "Default", "LG" and "Universal EFS" methods

 [+] Added universal method to read real MEID for models, which hide MEID or do not allow to read MEID by using standard methods (option in "Default" method - "MEID" section)

 [+] Added support to change ESN via EFS for newer LG models (including Korean SV, SD - series)

 [+] Added support for Pantech PN-810 (Helio Ocean), Samsung U340, Samsung I-series (16-digit passwords)

 [+] Added new memory presets to read SPC ("Universal RAM" method) for Treo Centro, HTC-6900, Sanyo 2500 (S1), Sanyo 7050, Sanyo Katana II kajeet

 [+] Added support to read/write user lock for some Samsung models (ex. A650, A670, etc) with non-standard location of user lock in NV items (automatic detection)

 [+] Added support to read/write SPC and user lock for some new Samsung models (ex. Sprint M300, etc) with non-standard location of SPC and user lock in NV items (automatic detection)

 [+] Added support to read SPC, MSL, User Lock for many Motorola models with "syn_feature" file in EFS (ex. C290, V710, E815, V3C and many other models). "Motorola" method in "SPC" section

 [+] Added new method of writing PRL - native "Sanyo" ("PRL" section - "Other" tab). Sometimes "Universal" method does not work for Sanyo models correctly (phone`s signal skips to a different carrier). You must use this method in this case

 [+] Added new method of reading security codes (SPC, etc) - "Direct Eeprom method" ("SPC" section), which is quite similar "Universal RAM" method, but designed to work with eeprom. Sometimes security codes are located in eeprom (ex. old models, old Samsung models, all LG models, etc)

 [+] Added automatic reading and displaying FSC (Field Service Code) and OTKSL (One Time Key Subsidy Lock) at once after unlocking phone with using "SPC - Send" button ("SPC" section)

 [+] Added "Write "000000"" option ("SPC - Send" button in "SPC" section), in order to write SPC = 000000 in one click

 [+] Added ability to dump memory block where security codes have been searched to a disk (for manually re-viewing for example) ("Universal RAM" method - "SPC" section)

 [+] Added ability to save EFS file where security codes have been searched to a disk (for manually re-viewing for example) ("Universal EFS" method - "SPC" section)

 [!] Added ability to read/write up to 65536 NV items ("NV items" section) + range displaying in Hex/Dec

 [+] Added ability to make FULL backup of NV items for models (many modern and old models) which restart at trying of access to some NV items (check "nv_skip_list.txt" file for more details)

 [!] Improved "Universal RAM" method ("SPC" section) to avoid stop process of search in situations, when readable segments of memory have small unreadable areas inside

 [!] Increased speed of reading of eeprom (NV memory) twice, writing of eeprom in eight times, writing of memory (poke) twice. (In all methods)

 [!] "Real ESN" method of reading ESN moved from "Samsung V,S" method to "Default (nv_write)" method (as option)

 [!] "SPC" and "User Lock" sections temporary mixed together in one section (added switch)

 [!] Fixed very slow typing in "A-key Calculator" section ("Cave" tab)

 [!] Fixed two bugs ("division by zero" and "range check error") in "Scan Memory" function ("Memory" tab)

 [-] Removed "CAI rev." field as a numeric duplication of "Protocol" field ("Phone information" section)

 [!] Updated Help file to match changes

 [!] A lot of internal and user interface improvements and optimizations

CDMA Workshop [3.1.0] (01-Feb-2008)

 [+] Added "Protocol In Use" and "Band Class" displaying ("Monitor" tab)

 [+] Added detection of "Download Mode" at first reading of phone

 [+] Added  new button to switch UTStarcom models into DM mode - "USDM"

 [+] Added new method of changing ESN for new Axesstell models (ex. AXW-L800, etc)

 [+] Added bootloaders to support reading/writing flash memory on models based on MSM 6000, 6025, 6050 chipsets

 [+] Added support to read/write flash memory for ZTE models based on MSM 5105, 5500, 6000 chipsets (non-standard bootloader), such as: ZTE C100, 150, 160, 170, 180, 190, 200, 201, 202, 204, 220, 230, 231, 401, 631, 632, 705, etc, etc. Nokia 1255

 [+] Added support for upload bootloader protocol for Sanyo models (automatic detection)

 [+] Added support to switch Sky models into "Download Mode" ("Flash" section)

 [+] Added option to choose size of packets at reading flash memory (512 or 256)

 [!] Patched all bootloaders to support any ranges of addresses at writing flash memory

 [!] Changed format of "presets.txt" file for more easily using Start/End addresses of RAM

 [!] "Reset" button will now reset phone even if current phone mode is not "offline" or phone mode is "Download"

 [!] Fixed bug in reading Real ESN in some networks ("Samsung V, S-series" universal method)

 [!] Fixed using of ZTE bootloader in some systems ("ZTE" method of changing ESN)

 [!] More compatibility with some virtual COM ports (USB)

 [!] Updated built-in "Model ID" data-base

 [!] Updated Help file

CDMA Workshop [3.0.6] (21-Dec-2007)

 [+] Added new memory preset to read SPC (Universal RAM method) for Sanyo Katana DLX

 [+] Added calculation of second CRC for ESN in "Universal EFS" and bootloaders based methods. Calculation of this second CRC is necessary for some brands and models at changing of ESN.

 [+] Added support to change ESN on ZTE models based on MSM5105, 5500, 6000 chipsets, such as: ZTE C100, 150, 160, 170, 180, 190, 200, 201, 202, 204, 220, 230, 231, 401, 631, 632, 705, etc, etc. Nokia 1255

 [+] Added universal method to read Real ESN for korean Samsung models (V, S, B, etc - series), which are using encrypted ESN and do not allow to read ESN by standard methods.

 [!] Fixed bug when not possible to start bootloader for some models (Read/Write flash functions)

 [!] Fixed reading/writing phone information when logging mask is not zero.

 [!] Minor bugs fixed

CDMA Workshop [3.0.1] (03-Dec-2007)

 [+] Added support for Samsung a990, u540, u620 (16-digit passwords)

 [+]  Added support to work with up to 40 COM ports

 [+] Added support to write PRL for newer LG models vx8500, vx8550, vx9900, etc (automatic detection in "LG" method)

 [+] Added "Debug mode" (Menu - File - Options). In this mode CDMA Workshop will save commincation log with phone to a file, you may send this log to us in order to help find and locate your problem, bug in software, etc.

 [+] Added support to change ESN on Kyocera models based on chipsets up to msm5100, such as: 2035, 2135, 3035, 3245, 5135, 7135, s14, 1135/1155, 2235/2255, 2325/2345, se44/se47, Blade/Phantom, etc.

 [+] Added support to Read/Write flash memory directly using bootloaders. These functions are based on Kyocera bootloaders, but it will work on most other brands and models based on native Qualcomm protocols, it included bootloaders to work with chipsets up to msm5100 at this moment.  These functions will be always in a development and adding new bootloaders to support more chipsets and models.

 [!] Improved NAM settings writing. Only changed fields will be written. Changed fields are highlighted also now.

 [!] Minor bug fixes and improvements

CDMA Workshop [2.8.5] (07-Oct-2007)

 [+] Added support for some Samsung models with 4-byte CRC in packets.

 [+] Added support for old Samsung DM protocol (ex. Samsung 611, 811, N101, N105, etc)

 [+] Added new method of changing ESN - "Samsung 611, N105, etc" (ex. Samsung 611, 811, N101, N105, etc)

 [+] Added new button to switch into DM mode - "SMDM". This method is used for Samsung models for Korean, Asia and Oceania, Israeli, etc markets, such as X, E, V, S, B - series, some A and some N - series.

 [+] Added support for Withus / Modottel NV items (non-standard packets)

 [+] Added support for Sky H100 and C-Motech modems (16-digit passwords)

 [!] Updated built-in DM engine

CDMA Workshop [2.8.0] (28-Sep-2007)

 [+] Added support to add your own custom memory presets from a file (presets.txt) to the general list of presets (SPC - Universal RAM method).

 [+] Added three new memory presets to read SPC ("Universal RAM" method) - "Sanyo 3200", "Katana II", "Mogul/P4000/PPC6800/XV6800"

 [+] Added support for Samsung u740 and AnyDATA models (16-digit passwords)

 [+] Added new method of changing ESN - "Samsung EsnDev". This method is necessary for Samsung models for Korean, Asia and Oceania, Israeli, etc markets, such as X,E-series, some A-series (ex. a562)

 [+] Added new method of changing ESN - "VK Mobile"

 [+] Added Reset/Rebuild EFS option for new Sanyo models (ex. 8300, 7500, Katana, etc)

 [+] Added "Getting started" Help (will be in a development)

 [+] Added displaying of internal "Mobile Model ID"

 [!] Improved method of changing ESN - "Samsung V, S-series". Added possibility to write encrypted ESN by "Default" or "EFS method" methods.

 [!] Improved reading ESN for Samsung V,S-series at once after rebuilding EFS.

 [!] Bug fixed in "Universal RAM" method. All founded SPC were not displayed when process is stopped by user or due to error.

 [!] Bug fixed and more compatibility with virtual COM ports (USB)

 [!] Internal code improvements and optimizations

CDMA Workshop [2.7.0] (10-Jul-2007)

 [+] Added A-key checksum calculator (Cave tab)

 [+] Added new method of reading SPC - "Universal, RAM method", this method supports "presets" feature and it already include some presets, for new Sanyo models (Sanyo 3100, 7500, 9000, Katana, M1, M200, etc) and "Universal" preset.

 [+] Added possibility to see ESN prefix (ESN owner or phone manufacturer) in pop-up hint by moving mouse cursor to the ESN field (Security tab - ESN section)

 [+] Added support for Samsung a870 (16-digit pasword)

 [+] Added support (16-digit paswords) for Samsung India market models

(a563, a633, a603, n393, n480, e159, n500)

 [+] Added possibility to read and write SID/NID pairs for some non-standart LG models (automatic detection)

 [+] Added new model "Nokia 8587" to the "Custom methods" , ESN section

 [+] Added new model "Axesstel (other models)" to the "Custom methods" , ESN section

 [!] Improvements and more compatibility with the different Kyocera models in "Kyocera Minlock (SPC3)" method

 [!] Bug fixed in "Axesstel ACW-1x" ESN change method (Custom methods)

 [!] Fixed reading phone infromation for some Sanyo models

CDMA Workshop [2.5.5] (19-May-2007)

 [+] Added support for Sky U130, U140, S130 (16-digit paswords)

 [+] Added Real-Time Network Monitor ("Monitor" section)

 [!] Bug fixed when connecting to COM port numbers more than 9

 [-] Removed automatic switching to "offline-d" mode when reading phone first time

 [!] "Mode" switching improvements

 [!] More compatibility with virtual COM ports (USB)

 [!] Internal DM engine changes and improvements

 [!] User Interface improvements

CDMA Workshop [2.5.1] (02-May-2007)

 [+] Added support for Samsung u510 (16-digit pasword)

 [+] Added support to read ESN for korean Motorola (Appeal) models (MS, V-series)

 [+] Added new method of changing ESN - "Custom methods" , where will be placed some non-standart custom methods, currently available following methods: Axesstell ACW-1x, Sungil Telecom SXT-800U, Dowtel WS-2100, Huawei FWT,  Nokia 8887

 [+] Added new feature - opportunity for Backup/Restore any amount of NV Items ("Memory" section)

 [!] Numerous minor bugs fixes and improvements

CDMA Workshop [2.4.8] (02-Apr-2007)

 [+] Added support to read Kyocera Minlock (SPC3)

 [+] Added support to read/write "Banner" (Nam section)

 [+] Added support to work with up to 25 COM ports

 [+] Added support for Tellit models (16-digit pasword)

 [+] Added button (Nam section) to generate "not programmed" IMSI

 [+] Added auto-detection for Korean Samsung models when reading User-lock on main screen

 [!] Change default GUI position from desktop centered to screen centered

 [!] Improvements in ESN change "RAM method"

 [!] Fixed rare bug with getting error message in ESN change "RAM method"

 [!] Internal DM engine bug fixes and improvements

CDMA Workshop [2.4.1] (16-Mar-2007)
 

 [+] Added support to read SPC/MSL and Akey for SonyEriccson  models (ex. t608, etc)

 [+] Added COM10 to ports list (customer request)

 [+] Removed NAM3 and NAM4 from NAM lists

 [!] Bug fixed when not possible to read Akey for NAM2 using Default method

 [!] Bug fixed in internal DM engine with converting some characters in packets (has appeared in v2.3.9)

 [!] Minor User Interface improvements

CDMA Workshop [2.3.9] (06-Mar-2007)
 

 [+] Added support for Samsung a850, a562, x430 (16-digit paswords)

 [+] Added support to add custom passwords from a file to the general list of passwords

 [+] Added baud rate automatic switch to 115200 in DM mode

 [+] Added rebuilding Eeprom / EFS option for Samsung models

 [+] Added support to read/write SPC and User lock for Korean Samsung models.

 [+] Added COM9 to ports list

 [!] Bug fixed when not possible to read memory block more than 1048576b

 [!] Improved internal DM mode engine

 [!] Improvements in User Interface

 [!] Several internal bug fixes and improvements

CDMA Workshop [2.3.5] (31-Jan-2007)
 

 [+] Added support for Sky 8600, 8700, U100, U110, S100 (16-digit paswords)

 [+] Added support for Curitel hx510b/520b/525b, Hyundai H100/H150 (16-digit paswords)

 [+] Added switch to create full packet in command (136 bytes) in "Terminal" section

 [!] Improvements in User Interface

 [!] Some internal bugs fixed

CDMA Workshop [2.2.9] (21-Jan-2007)
 

 [+] New ESN change method "Samsung V, S - series"

 [!] Improved Cave settings writing algorithm

 [!] Minor bugs fixed

CDMA Workshop [2.2.7] (24-Dec-2006)

 [!] Fixed memory leak in scanning memory algorithm

 [!] Improved ESN change method "Universal, RAM method"

 [!] Improved internal COM communication engine

 [!] Minor User Interface improvements

...

...

...